INSTRUCTIONS FOR ASSEMBLING THEATRE

Select and print the five sections indicated on the WORKPAGE (Bottom Front, Top Front, Base, Back, & Sides).

FRONT:        Divided into 2 sections: Bottom & the Top. Glue together as shown in Figs 1 & 2                    

BASE :          Score, fold, and glue the flaps as indicated to form shallow box.

BACK :         Glue at the bottom to one of the long sides of the Base.

FRONT :       Glue to the remaining long side of Base. Front extending approximately 1cm each side.
(composite)       

 SIDES:          Score & fold flaps at right angles, the V slots uppermost & blue side facing outwards.
                        Glue a flap to each side of the Back, flush with the top. When glue is dry, glue other ends
                         to the Front remembering that the Front is wider so the flap will be set in about 1cm.

                                           
                             Glue top to bottom section so that the former lines up with the top of cutout rectangle.

  The "SLIDER" page has six strips. When inserting the character into the slot score the tab, fold keeping
  the black side facing downwards as this helps to identify the character later

The "CURTAIN" is designed to slide up & down behind the proscenium front. A grey strip is
glued vertically to each side to form a retaining slot for the curtain. It is important to only put glue
on the side tabs. A piece of adhesive tape stuck to the top of the curtain will help to raise & lower it.